fy6300 30mhz digital dds dual channel function signal source generator arbitrary waveform pulse frequency meter us eu 250msa s
signal-generator AD9833 Module frequency generator DDS signal square/sine/triangle wave serial host computer control
1799.04 Руб.
AD9833 DDS Signal Generator Triangle Sine Wave Signal Source Programmable Microprocessors Sine Square Wave Module Board
691.44 Руб.
Трансивер Finisar 8Gb (8GBASE-SR), Small Form-factor Pluggable (SFP Plus), 850nm Transmitter Wavelength, LC Connector, Multi-mode Fiber (MMF), Digital Diagnostics Function (DDM), Tri-Rate, up to 150 meter reach FTLF8528P2BCV
1150 Руб.
Dual system PWM1 pulse frequency adjustable duty ratio cycle square wave module rectangular wave square wave signal generator
338.3 Руб.
JTS RU-8011DB/RU-850LTH - Радиосистема UHF одноканальная с ручным передатчиком
36015 Руб.
Радиосистема JTS RU-8012DB/RU-850LTB+CM-501 ресивер двухканальный + 2 поясных передатчика
66967 Руб.
HS630 three-phase sinusoidal signal generator with phase adjustable 0 to 360 degrees 0.1 to 2000 Hz band frequency meter
22800.78 Руб.
Спортивная сумка adidas by Stella McCartney, Pulse Olive Signal, голубой, коричневый
27813 Руб.
Описание:
Product description: Laboratory universal meter Uni-T UT8802E TheUni-T UT8802Elaboratory meter is a high-end universal measuring device. UT8802E allows measurements of DC voltage up to 1000 V, AC voltage up to 750 V and DC and AC current up to 20 A. The meter is equipped with alarge, easy to read LCD display. Front panel of the meter UT8802E. Rear panel of the UT8802E meter. Capabilities of the Uni-T UT8802E laboratory meter TheUni-T UT 8802Elaboratorymultimeteris equipped with a number of functions that allow precise measurements of such quantities as voltage, DC and AC current, resistance, capacity and circuit continuity. The UT8802E allows the user to measure filling factor, frequency, transistor testing orTrue RMS. The meter is equipped with Data Hold function and minimum and maximum value measurement. On the back wall there is a built-in USB port type B. TheUni-T UT8802Emeter is equipped with a large, easy-to-read inverted display, which makes it easy for the user to read the measurement results. Multimeter is equipped with rubber corners, which protects it from mechanical damage. Specifications of the Uni-T UT8802E laboratory meter Parameter Scope DC DC voltage 200 mV / 2 V / 20 V / 200 V / 1000 V AC alternating voltage 2 V / 20 V / 200 V / 750 V DC DC 200 uA / 2 mA / 20 mA / 200 mA / 10 A AC alternating current 2 mA / 20 mA / 200 mA / 20 A Resistance 200 Ω / 2 kΩ / 20 kΩ / 200kΩ /2 MΩ / 200 MΩ Capacity 20 nF / 2 µF / 20 µF / 200 µF / 2mF / 20mF / 100mF Frequency 200 kHz / 10 MHz Temperature from -40 °C to 1000 °C Automatic range selection No Standby Yes Beacon Yes Transistor tester Yes Diode tester No Batterytester No Data Hold function Yes Measurement of the rms value True RMS Yes Battery indicator Yes Backlighting Yes Display Backlit, inverted Dimensions 365 x 110 x 320 mm Power supply mains (cable included) Mass 3.07 kg